Precautions for cutting tantalum plates
After annealing, tantalum plates are soft and tough, and severe adhesion will occur during cutting, causing adhesion and wear of the tool.
When cutting tantalum plates, carbide tools should be used, and the tools should be kept sharp. The cutting speed should not be too low to avoid sticking and tearing.
When cutting tantalum plates, a cutting fluid with both cooling and lubrication functions should be used, and the flow rate should be sufficient.
Tantalum plate basic parameter table
|
Material |
Tantalum sheet / Tantalum Plate |
|
Purity |
99.95% |
|
Grade |
R05200, R05400,R05252, RO5255,R05240 |
|
Standard |
ASTM B708. GB/T 3629 |
|
|
1.Hot-rolled/Cold-rolled; |
Zhenan Tantalum Wire Product Details
Introduction to the packaging and transportation of our metal products
We provide the material composition table and inspection report of the products.
First, pack with moisture-proof paper.
Second, pack with kraft paper.
Third, pack with foam plastic around the plywood box.
Finally, pack the product into the plywood box.
FAQ About ZhenAn
1. Can you keep the unit price unchanged from last time?
The price of our products will fluctuate according to the price of raw materials, and may rise or fall. Even if the fluctuation is large, we will try our best to keep the best price for you.
2. What products do you mainly supply?
We mainly supply tungsten, molybdenum, zirconium, tantalum, niobium and their alloy products.
3. What is the quality control of your company?
We have ISO 9001:2015 certification, and we must strictly inspect our products by the quality control department before shipment.
4. What services can we provide?
Accepted delivery terms: FOB, CFR, CIF, EXW, FAS, CIP, FCA, Express;
Accepted payment methods: T/T, L/C, PayPal;