Production process of molybdenum rod products
Raw material preparation:
Select high-quality molybdenum materials as raw materials, such as molybdenum trioxide or molybdenum powder, and cut and clean them to ensure that the surface is clean and free of impurities. Hot processing:
The raw materials are deformed by heating, and chemical reactions occur at high temperatures to generate molybdenum powder, and then the molybdenum powder is sprayed onto the collector in a directional manner to form the shape of the molybdenum rod. Cold processing:
The hot-processed molybdenum rods are precisely processed, including drawing, rolling, turning, etc., to obtain the required size and shape. Heat treatment:
The cold-processed molybdenum rods are heat-treated to improve their mechanical properties and corrosion resistance. Usually including annealing, normalizing, quenching and other treatment methods. Surface treatment:
The molybdenum rods are polished, sandblasted, pickled, etc. to obtain a smooth, clean, oxide-free surface, improving the appearance quality and service life of the molybdenum rods.
Main parameters of Zhenan molybdenum rod
| Surface | Diameter (mm) | Tolerance (mm) | Length (mm) | Tolerance (mm) | Roughness (um) |
|---|---|---|---|---|---|
| Forged | Ф1.0-Ф800 | ±1~±2 | 10-3000 | ±1~±2 | Ra≤3.2 |
| Lathed | Ф1.0-Ф800 | ±0.01~±0.05 | 10-3000 | ±0.01~±1 | Ra≤1.6 |
| Ground | Ф1.0-Ф80 | ±0.01~±0.05 | 10-3000 | ±0.01~±1 | Ra≤0.8 |
High purity molybdenum rod product picture display
Our advantages
1. Competitive prices
2. Strong R&D team
3. Production process control management
4. Implementation of continuous improvement covering production, sales and customer service.
FAQ About ZhenAn
Q1: Can I get samples for testing?
A: Yes! The test can visually show the application results. In fact, the samples are free,
You only need to pay the courier fee.
Q2: Can I use our own packaging?
A: Yes! We can provide OEM. You can send the packaging materials to our factory
Or we can buy the specified packaging for you.
If this is the case, you may need to pay some additional fees.
Q3: Do you have an inspection procedure for evaporation materials?
A: 100% self-inspection before packaging