High-Quality Electric-Grade Glass Fiber Cloth China
| Style | Yarn | Norminal Yarn count | Norminal Weight | Thickness | Structure | |||||
| warp | weft | warp | weft | |||||||
| warp | weft | inch | cm | gsm | osy | mm | ||||
| CW7628 | CC9-67*1 | CC9-67*1 | 43.2 | 30 | 17 | 12 | 210 | 6.2 | 0.2 | Plain |
| CW2523 | CC11-68*1*3 | CC11-68*1*3 | 30.5 | 20 | 12 | 8 | 400 | 11.8 | 0.35 | Plain |
| CW3732 | CC13-128*1 | CC13-128*1 | 45.7 | 33 | 18 | 13 | 430 | 12.7 | 0.43 | Twill |
| CW666 | CC11-68*1*3 | CC11-68*1*3 | 45.7 | 33 | 18 | 13 | 660 | 19.5 | 0.6 | Satin |
| CW3784 | CC13-128*1*2 | CC13-128*1*2 | 45.7 | 33 | 18 | 13 | 840 | 24.8 | 0.8 | Satin |
| CW3786 | CC13-128*1*3 | CC13-128*1*3 | 45.7 | 33 | 18 | 13 | 1300 | 38.3 | 1.1 | Satin |
| CW3788 | CC13-128*1*4 | CC13-128*1*4 | 45.7 | 33 | 18 | 13 | 1600 | 47.2 | 1.5 | Satin |




Applications of Different Shapes/Types of Electronic-Grade Fiberglass Cloth
The choice of weave style and thickness is a critical engineering decision that balances electrical performance, mechanical properties, thickness control, and cost.
|
Weave Style / Type |
Key Characteristics |
Typical Applications & Reasons for Use |
|---|---|---|
|
Plain Weave (e.g., Styles 1010, 106, 1080) |
Tightest weave, excellent stability, low yarn slippage, good drillability. |
HDI PCBs in Smartphones & Wearables: Its thinness allows for more layers in a compact space. Used in inner layers and for building up microvias. Good for fine-line circuits. |
|
Twill Weave (e.g., Style 2116) |
Good drapeability, smoother surface than plain weave, good resin wetting, balanced properties. |
Standard Multi-layer PCBs: The workhorse fabric. Offers an excellent balance of thickness, resin absorption, and mechanical strength for a vast array of applications from consumer electronics to automotive controllers. |
|
Satin Weave (e.g., 8-Harness Satin, Style 7628) |
Smoothest surface, long yarn "floats," excellent resin wetting, superior drillability, higher thickness. |
Thick Multi-layer Boards & High-Layer-Count Backplanes: The smooth surface is ideal for impedance control in high-speed signals. Its thickness provides structural rigidity for large boards like server motherboards and networking equipment. |
|
Heavy Weave (e.g., Style 7628) |
Very thick, high strength, high resin content, can pose challenges for drilling very small vias. |
Power Supplies, Automotive ECUs: Where mechanical strength and rigidity are more critical than extremely high signal speeds or dense via patterns. |
|
Low-Profile Weaves (e.g., LP) |
Specifically engineered to have a flatter, more uniform surface by using smaller yarns. |
High-Speed/High-Frequency PCBs: Minimizes signal propagation delay and loss (skew). Essential for 5G infrastructure, advanced networking, and microwave applications. |
|
Open Weave (e.g., Leno) |
An open mesh structure, high permeability. |
Specialized Applications: Often used as a boundary layer in complex multi-layer boards or for specific composite applications requiring high resin flow-through. |
In summary, the manufacturing process is a feat of precision engineering to create a pure and consistent base material. The choice of the final fabric's "shape" or style is then a tactical decision made by PCB designers to optimize the performance, reliability, and cost of the electronic device it will be used in.












